Q4OS Forum

ydek

Member

From: Brasil

Registered: 2018-06-11

Posts: 42

Quark 20.04 crashes when booting after Grub

Hi.
I installed Quark 20.04.4 on the computer with processor AMD Sempron 3000, 2 Gb memory and it is working great, congratulations to the developers.
After installing I did the updates.

The only problem I had in installing Quark OS 20.04 was booting after Grub, it was stuck on the Kubuntu logo.
So I had to use tty (Ctrl + Alt + F2) to login and type startx, then yes you can get to the desktop.
Any tips to get to SDDM?

Thanks!

Last edited by ydek (2022-03-20 18:29)

q4osteam

Q4OS Team

Registered: 2015-12-06

Posts: 4,256

Website

Re: Quark 20.04 crashes when booting after Grub

At first we would recommend to use 20.04.6, "quark-20.04.6-x64-qr1.iso" for installation https://sourceforge.net/projects/quark- … ook-media/
The issue seems to be hardware related, as we are not able to reproduce that. You could try to run in terminal:
$ sudo systemctl status sddm.service
$ sudo systemctl enable sddm.service
$ sudo systemctl unmask sddm.service
and post back.

This is not Quark support forum, please post here https://sourceforge.net/p/quark-os/discussion/general/

ydek

Member

From: Brasil

Registered: 2018-06-11

Posts: 42

Re: Quark 20.04 crashes when booting after Grub

Hi, thanks for the answer and attention.
As soon as I do the tests of the commands that you indicated I will give the return.

ydek

Member

From: Brasil

Registered: 2018-06-11

Posts: 42

Re: Quark 20.04 crashes when booting after Grub

Before installing Quark 20.04 I had installed Q4OS Trinity Centaurus and Q4OS Trinity Gemini but I couldn't have 1024x768 resolution, only 640x480 resolution.
But with Quark 20.04 it was possible to have 1024x768 resolution and be able to use Trinity Desktop with that resolution.

I created a topic about this problem for Chipset SiS 661/741/760, here is the link:
https://www.q4os.org/forum/viewtopic.php?id=3847

Last edited by ydek (2022-03-20 23:21)

ydek

Member

From: Brasil

Registered: 2018-06-11

Posts: 42

Re: Quark 20.04 crashes when booting after Grub

Sorry for putting this question on the wrong topic, it was to have chosen "General Discussion".

Last edited by ydek (2022-03-20 19:15)

ydek

Member

From: Brasil

Registered: 2018-06-11

Posts: 42

Re: Quark 20.04 crashes when booting after Grub

At first we would recommend to use 20.04.6, "quark-20.04.6-x64-qr1.iso" for installation https://sourceforge.net/projects/quark- … ook-media/

I installed the version Quark 20.04.6, but the same problem occurred.

ydek

Member

From: Brasil

Registered: 2018-06-11

Posts: 42

Re: Quark 20.04 crashes when booting after Grub

The solution i found was to install Trinity Desktop and set TDM Display Manager as default Login Manager.
When restarting after Grub, now yes you can get to the Login Manager to enter the password.

ydek

Member

From: Brasil

Registered: 2018-06-11

Posts: 42

Re: Quark 20.04 crashes when booting after Grub

For me it was better Quark with Trinity, the computer is working very well, fast and light.
Thanks!

Last edited by ydek (2022-03-21 20:51)