It is possible to run the Trinity in an ARM with Rockchip (3228A)?


Hi everyone,

I am very happy with Q4OS in my old netbook 32 bits running under Trinity interface. It runs fast. Thank you, guys.

However, I read that Q4OS supports ARM architecture  (https://q4os.org/dqa012.html). As I am enrolled in another
project  with ARM and just finished to install an ARMBIAN (Debian buster) in a TVBOX MXQ PRO CPU 3228A, with 1 G of RAM and 8 of ROM, 
and  tried to install the Q4OS over this TVBOX with ARMBIAN (https://www.armbian.com/rk322x-tv-box/). 
So,  I did the install procedure of the Q4OS on this tvbox following https://q4os.org/dqa012.html,
but some troubles, with  only messages from the system:

root@boxit:/home/ccs/Downloads# sh q4os-setup.sh 

www.q4os.org
You are going to add Q4OS repositories and setup complete Q4OS system ...
... press 'Enter' to continue, 'Ctrl+C' to cancel ...

Detecting current system ...
... press 'Enter' to continue ...
[I] Distro: Debian, buster
[I] Architecture: armhf
[E:] This system is not ready for Q4OS setup. Exiting ...

root@boxit:/home/ccs/Downloads# 

Questions:

Is there an strategy to install the Trinity customized for you over these TVBOX? 
If possible, which are the steps?
Where was my mistake? 
What were my wrong supposition points?
Is the Q4OS support only Raspberry ARM? (as described in: https://www.q4os.org/dqa010.html#instl)
 
I described my experiments in 2 videos in Youtube, sorry, in Portuguese spoken.
https://www.youtube.com/watch?v=X3rtZmQY9Po (part 2)

Here I am using the ICEWM ... with good performance, but another UI, like Trinity,  
has been aimed  for people without or almost none background in computers.


Thanks in advance for any help or give me some explanation about  what happened?

My best regads

Claudio



HERE about this BOX:
root@boxit:/home/ccs/Downloads# hwinfo --short
cpu:                                                            
                       CPU
                       CPU
                       CPU
                       CPU
keyboard:
  /dev/input/event3    Dell QuietKey Keyboard
  /dev/input/event0    RC for dw_hdmi
  /dev/input/event4    gpio_ir_recv
mouse:
  /dev/input/event2    Trust International B.V Optical Mouse
network:
  eth0                 ARM Ethernet controller
network interface:
  sit0                 Network Interface
  eth0                 Ethernet network interface
  lo                   Loopback network interface
  dummy0               Ethernet network interface
disk:
  /dev/ram0            Disk
  /dev/zram0           Disk
  /dev/zram1           Disk
  /dev/mmcblk2rpmb     Disk
  /dev/mmcblk2boot0    Disk
  /dev/mmcblk2boot1    Disk
  /dev/mmcblk2         Disk
partition:
  /dev/mmcblk2p1       Partition
usb controller:
                       ARM USB controller


It is a 4 core ...