[ 376.978] X.Org X Server 1.20.4 X Protocol Version 11, Revision 0 [ 376.978] Build Operating System: Linux 4.19.0-12-amd64 i686 Debian [ 376.978] Current Operating System: Linux q4os-desktop 4.19.0-13-686 #1 SMP Debian 4.19.160-2 (2020-11-28) i686 [ 376.978] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-13-686 root=UUID=796fb0fe-5a37-4e1e-a564-65183737023e ro quiet loglevel=3 systemd.log_color=0 systemd.show_status=1 [ 376.978] Build Date: 01 December 2020 05:59:57PM [ 376.978] xorg-server 2:1.20.4-1+deb10u2 (https://www.debian.org/support) [ 376.978] Current version of pixman: 0.36.0 [ 376.978] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 376.978] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 376.978] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Dec 6 11:08:32 2020 [ 376.978] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 376.978] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 376.979] (==) No Layout section. Using the first Screen section. [ 376.979] (==) No screen section available. Using defaults. [ 376.979] (**) |-->Screen "Default Screen Section" (0) [ 376.979] (**) | |-->Monitor "" [ 376.979] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 376.979] (==) Automatically adding devices [ 376.979] (==) Automatically enabling devices [ 376.979] (==) Automatically adding GPU devices [ 376.979] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 376.979] (WW) The directory "/usr/share/fonts/X11/misc" does not exist. [ 376.979] Entry deleted from font path. [ 376.979] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 376.979] Entry deleted from font path. [ 376.979] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 376.979] Entry deleted from font path. [ 376.980] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 376.980] Entry deleted from font path. [ 376.980] (WW) The directory "/usr/share/fonts/X11/Type1" does not exist. [ 376.980] Entry deleted from font path. [ 376.980] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 376.980] Entry deleted from font path. [ 376.980] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 376.980] Entry deleted from font path. [ 376.980] (==) FontPath set to: built-ins [ 376.980] (==) ModulePath set to "/usr/lib/xorg/modules" [ 376.980] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 376.980] (II) Loader magic: 0x680740 [ 376.980] (II) Module ABI versions: [ 376.980] X.Org ANSI C Emulation: 0.4 [ 376.980] X.Org Video Driver: 24.0 [ 376.980] X.Org XInput driver : 24.1 [ 376.980] X.Org Server Extension : 10.0 [ 376.981] (++) using VT number 1 [ 376.987] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31 [ 376.988] (II) xfree86: Adding drm device (/dev/dri/card0) [ 376.991] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 11 paused 0 [ 376.995] (--) PCI:*(1@0:0:0) 1002:5446:174b:7106 rev 0, Mem @ 0xf8000000/67108864, 0xfe9fc000/16384, I/O @ 0x0000de00/256, BIOS @ 0x????????/131072 [ 376.995] (II) LoadModule: "glx" [ 376.996] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 376.998] (II) Module glx: vendor="X.Org Foundation" [ 376.998] compiled for 1.20.4, module version = 1.0.0 [ 376.998] ABI class: X.Org Server Extension, version 10.0 [ 376.998] (==) Matched ati as autoconfigured driver 0 [ 376.998] (==) Matched modesetting as autoconfigured driver 1 [ 376.998] (==) Matched fbdev as autoconfigured driver 2 [ 376.998] (==) Matched vesa as autoconfigured driver 3 [ 376.998] (==) Assigned the driver to the xf86ConfigLayout [ 376.998] (II) LoadModule: "ati" [ 376.998] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so [ 376.998] (II) Module ati: vendor="X.Org Foundation" [ 376.998] compiled for 1.20.4, module version = 19.0.1 [ 376.998] Module class: X.Org Video Driver [ 376.998] ABI class: X.Org Video Driver, version 24.0 [ 376.998] (II) LoadModule: "r128" [ 376.999] (II) Loading /usr/lib/xorg/modules/drivers/r128_drv.so [ 376.999] (II) Module r128: vendor="X.Org Foundation" [ 376.999] compiled for 1.20.3, module version = 6.12.0 [ 376.999] Module class: X.Org Video Driver [ 376.999] ABI class: X.Org Video Driver, version 24.0 [ 376.999] (II) LoadModule: "modesetting" [ 376.999] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 376.999] (II) Module modesetting: vendor="X.Org Foundation" [ 376.999] compiled for 1.20.4, module version = 1.20.4 [ 376.999] Module class: X.Org Video Driver [ 376.999] ABI class: X.Org Video Driver, version 24.0 [ 376.999] (II) LoadModule: "fbdev" [ 376.999] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 376.999] (II) Module fbdev: vendor="X.Org Foundation" [ 376.999] compiled for 1.20.0, module version = 0.5.0 [ 377.000] Module class: X.Org Video Driver [ 377.000] ABI class: X.Org Video Driver, version 24.0 [ 377.000] (II) LoadModule: "vesa" [ 377.006] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 377.007] (II) Module vesa: vendor="X.Org Foundation" [ 377.007] compiled for 1.20.1, module version = 2.4.0 [ 377.007] Module class: X.Org Video Driver [ 377.007] ABI class: X.Org Video Driver, version 24.0 [ 377.007] (II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP), ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP), ATI Rage 128 Pro GL PA (PCI/AGP), ATI Rage 128 Pro GL PB (PCI/AGP), ATI Rage 128 Pro GL PC (PCI/AGP), ATI Rage 128 Pro GL PD (PCI), ATI Rage 128 Pro GL PE (PCI/AGP), ATI Rage 128 Pro GL PF (AGP), ATI Rage 128 Pro VR PG (PCI/AGP), ATI Rage 128 Pro VR PH (PCI/AGP), ATI Rage 128 Pro VR PI (PCI/AGP), ATI Rage 128 Pro VR PJ (PCI/AGP), ATI Rage 128 Pro VR PK (PCI/AGP), ATI Rage 128 Pro VR PL (PCI/AGP), ATI Rage 128 Pro VR PM (PCI/AGP), ATI Rage 128 Pro VR PN (PCI/AGP), ATI Rage 128 Pro VR PO (PCI/AGP), ATI Rage 128 Pro VR PP (PCI), ATI Rage 128 Pro VR PQ (PCI/AGP), ATI Rage 128 Pro VR PR (PCI), ATI Rage 128 Pro VR PS (PCI/AGP), ATI Rage 128 Pro VR PT (PCI/AGP), ATI Rage 128 Pro VR PU (PCI/AGP), ATI Rage 128 Pro VR PV (PCI/AGP), ATI Rage 128 Pro VR PW (PCI/AGP), ATI Rage 128 Pro VR PX (PCI/AGP), ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI), ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (PCI/AGP), ATI Rage 128 4X SF (PCI/AGP), ATI Rage 128 4X SG (PCI/AGP), ATI Rage 128 4X SH (PCI/AGP), ATI Rage 128 4X SK (PCI/AGP), ATI Rage 128 4X SL (PCI/AGP), ATI Rage 128 4X SM (AGP), ATI Rage 128 4X SN (PCI/AGP), ATI Rage 128 Pro ULTRA TF (AGP), ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP), ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?), ATI Rage 128 Pro ULTRA TU (AGP?) [ 377.007] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 377.007] (II) FBDEV: driver for framebuffer: fbdev [ 377.007] (II) VESA: driver for VESA chipsets: vesa [ 377.008] (WW) Falling back to old probe method for modesetting [ 377.008] (WW) Falling back to old probe method for fbdev [ 377.008] (II) Loading sub module "fbdevhw" [ 377.008] (II) LoadModule: "fbdevhw" [ 377.008] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 377.008] (II) Module fbdevhw: vendor="X.Org Foundation" [ 377.008] compiled for 1.20.4, module version = 0.0.2 [ 377.008] ABI class: X.Org Video Driver, version 24.0 [ 377.008] (EE) open /dev/fb0: No such file or directory [ 377.008] (II) R128(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 377.008] (==) R128(0): Depth 24, (--) framebuffer bpp 32 [ 377.008] (==) R128(0): Default visual is TrueColor [ 377.008] (==) R128(0): Using gamma correction (1.0, 1.0, 1.0) [ 377.008] (II) R128(0): PCI bus 1 card 0 func 0 [ 377.008] (II) R128(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) [ 377.008] (II) R128(0): Acceleration of RENDER operations will be enabled upon successful loading of DRI and EXA. [ 377.009] (II) Loading sub module "vgahw" [ 377.009] (II) LoadModule: "vgahw" [ 377.009] (II) Loading /usr/lib/xorg/modules/libvgahw.so [ 377.009] (II) Module vgahw: vendor="X.Org Foundation" [ 377.009] compiled for 1.20.4, module version = 0.1.0 [ 377.009] ABI class: X.Org Video Driver, version 24.0 [ 377.009] (II) R128(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0 [ 377.010] (==) R128(0): RGB weight 888 [ 377.010] (II) R128(0): Using 8 bits per RGB (8 bit DAC) [ 377.010] (II) Loading sub module "int10" [ 377.010] (II) LoadModule: "int10" [ 377.010] (II) Loading /usr/lib/xorg/modules/libint10.so [ 377.010] (II) Module int10: vendor="X.Org Foundation" [ 377.010] compiled for 1.20.4, module version = 1.0.0 [ 377.010] ABI class: X.Org Video Driver, version 24.0 [ 377.010] (II) R128(0): initializing int10 [ 377.011] (II) R128(0): Primary V_BIOS segment is: 0xc000 [ 377.011] (--) R128(0): Chipset: "ATI Rage 128 Pro ULTRA TF (AGP)" (ChipID = 0x5446) [ 377.011] (--) R128(0): Linear framebuffer at 0xf8000000 [ 377.011] (--) R128(0): MMIO registers at 0xfe9fc000 [ 377.011] (--) R128(0): VideoRAM: 32768 kByte (128-bit SDR SGRAM 1:1) [ 377.011] (II) Loading sub module "ramdac" [ 377.011] (II) LoadModule: "ramdac" [ 377.011] (II) Module "ramdac" already built-in [ 377.011] (II) Loading sub module "ddc" [ 377.011] (II) LoadModule: "ddc" [ 377.011] (II) Module "ddc" already built-in [ 377.011] (II) Loading sub module "i2c" [ 377.011] (II) LoadModule: "i2c" [ 377.011] (II) Module "i2c" already built-in [ 377.011] (II) Loading sub module "vbe" [ 377.011] (II) LoadModule: "vbe" [ 377.011] (II) Loading /usr/lib/xorg/modules/libvbe.so [ 377.011] (II) Module vbe: vendor="X.Org Foundation" [ 377.011] compiled for 1.20.4, module version = 1.1.0 [ 377.011] ABI class: X.Org Video Driver, version 24.0 [ 377.011] (II) R128(0): VESA BIOS detected [ 377.011] (II) R128(0): VESA VBE Version 2.0 [ 377.011] (II) R128(0): VESA VBE Total Mem: 32768 kB [ 377.012] (II) R128(0): VESA VBE OEM: ATI RAGE128 [ 377.012] (II) R128(0): VESA VBE OEM Software Rev: 1.0 [ 377.012] (II) R128(0): VESA VBE OEM Vendor: ATI Technologies Inc. [ 377.012] (II) R128(0): VESA VBE OEM Product: R128 [ 377.012] (II) R128(0): VESA VBE OEM Product Rev: 01.00 [ 377.079] (II) R128(0): VESA VBE DDC supported [ 377.079] (II) R128(0): VESA VBE DDC Level 2 [ 377.079] (II) R128(0): VESA VBE DDC transfer in appr. 2 sec. [ 377.310] (II) R128(0): VESA VBE DDC read successfully [ 377.310] (II) R128(0): Manufacturer: SAM Model: 252 Serial#: 1146040631 [ 377.310] (II) R128(0): Year: 2006 Week: 49 [ 377.310] (II) R128(0): EDID Version: 1.3 [ 377.310] (II) R128(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V [ 377.310] (II) R128(0): Sync: Separate Composite [ 377.310] (II) R128(0): Max Image Size [cm]: horiz.: 34 vert.: 27 [ 377.310] (II) R128(0): Gamma: 2.20 [ 377.310] (II) R128(0): DPMS capabilities: Off; RGB/Color Display [ 377.310] (II) R128(0): First detailed timing is preferred mode [ 377.310] (II) R128(0): redX: 0.650 redY: 0.330 greenX: 0.300 greenY: 0.600 [ 377.310] (II) R128(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329 [ 377.310] (II) R128(0): Supported established timings: [ 377.310] (II) R128(0): 720x400@70Hz [ 377.310] (II) R128(0): 640x480@60Hz [ 377.310] (II) R128(0): 640x480@67Hz [ 377.310] (II) R128(0): 640x480@72Hz [ 377.310] (II) R128(0): 640x480@75Hz [ 377.310] (II) R128(0): 800x600@56Hz [ 377.310] (II) R128(0): 800x600@60Hz [ 377.310] (II) R128(0): 800x600@72Hz [ 377.310] (II) R128(0): 800x600@75Hz [ 377.310] (II) R128(0): 832x624@75Hz [ 377.310] (II) R128(0): 1024x768@60Hz [ 377.310] (II) R128(0): 1024x768@70Hz [ 377.310] (II) R128(0): 1024x768@75Hz [ 377.310] (II) R128(0): 1280x1024@75Hz [ 377.310] (II) R128(0): 1152x864@75Hz [ 377.310] (II) R128(0): Manufacturer's mask: 0 [ 377.310] (II) R128(0): Supported standard timings: [ 377.310] (II) R128(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 377.310] (II) R128(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513 [ 377.310] (II) R128(0): #2: hsize: 1152 vsize 864 refresh: 75 vid: 20337 [ 377.310] (II) R128(0): Supported detailed timing: [ 377.310] (II) R128(0): clock: 108.0 MHz Image Size: 338 x 270 mm [ 377.310] (II) R128(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0 [ 377.310] (II) R128(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0 [ 377.310] (II) R128(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 145 MHz [ 377.310] (II) R128(0): Monitor name: SyncMaster [ 377.310] (II) R128(0): Serial No: HSHLC00618 [ 377.310] (II) R128(0): EDID (in hex): [ 377.310] (II) R128(0): 00ffffffffffff004c2d520237314f44 [ 377.310] (II) R128(0): 311001036c221b782aaea5a6544c9926 [ 377.310] (II) R128(0): 145054bfef8081808140714f01010101 [ 377.310] (II) R128(0): 010101010101302a009851002a403070 [ 377.310] (II) R128(0): 1300520e1100001e000000fd00384b1e [ 377.310] (II) R128(0): 510e000a202020202020000000fc0053 [ 377.310] (II) R128(0): 796e634d61737465720a2020000000ff [ 377.310] (II) R128(0): 004853484c4330303631380a20200025 [ 377.310] (II) R128(0): EDID vendor "SAM", prod id 594 [ 377.311] (II) R128(0): Using EDID range info for horizontal sync [ 377.311] (II) R128(0): Using EDID range info for vertical refresh [ 377.311] (II) R128(0): Printing DDC gathered Modelines: [ 377.311] (II) R128(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP) [ 377.311] (II) R128(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 377.311] (II) R128(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 377.311] (II) R128(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 377.311] (II) R128(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e) [ 377.311] (II) R128(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e) [ 377.311] (II) R128(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 377.311] (II) R128(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 377.311] (II) R128(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 377.311] (II) R128(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 377.311] (II) R128(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 377.311] (II) R128(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 377.311] (II) R128(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 377.311] (II) R128(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 377.311] (II) R128(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 377.311] (II) R128(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 377.311] (II) R128(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 377.311] (II) R128(0): PLL parameters: rf=2950 rd=65 min=12500 max=35000; xclk=13000 [ 377.311] (II) R128(0): Found CRT table, assuming VGA connector. [ 377.311] (II) R128(0): Output VGA-0 has no monitor section [ 377.311] (II) R128(0): I2C bus "VGA-0" initialized. [ 377.311] (II) R128(0): I2C device "VGA-0:ddc2" registered at address 0xA0. [ 377.358] (II) Loading sub module "shadowfb" [ 377.358] (II) LoadModule: "shadowfb" [ 377.358] (II) Loading /usr/lib/xorg/modules/libshadowfb.so [ 377.358] (II) Module shadowfb: vendor="X.Org Foundation" [ 377.358] compiled for 1.20.4, module version = 1.0.0 [ 377.358] ABI class: X.Org ANSI C Emulation, version 0.4 [ 377.358] (II) R128(0): Page flipping disabled [ 377.452] (II) R128(0): EDID for output VGA-0 [ 377.452] (II) R128(0): Manufacturer: SAM Model: 252 Serial#: 1146040631 [ 377.452] (II) R128(0): Year: 2006 Week: 49 [ 377.452] (II) R128(0): EDID Version: 1.3 [ 377.452] (II) R128(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V [ 377.452] (II) R128(0): Sync: Separate Composite [ 377.452] (II) R128(0): Max Image Size [cm]: horiz.: 34 vert.: 27 [ 377.452] (II) R128(0): Gamma: 2.20 [ 377.452] (II) R128(0): DPMS capabilities: Off; RGB/Color Display [ 377.452] (II) R128(0): First detailed timing is preferred mode [ 377.452] (II) R128(0): redX: 0.650 redY: 0.330 greenX: 0.300 greenY: 0.600 [ 377.452] (II) R128(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329 [ 377.452] (II) R128(0): Supported established timings: [ 377.452] (II) R128(0): 720x400@70Hz [ 377.452] (II) R128(0): 640x480@60Hz [ 377.452] (II) R128(0): 640x480@67Hz [ 377.452] (II) R128(0): 640x480@72Hz [ 377.452] (II) R128(0): 640x480@75Hz [ 377.452] (II) R128(0): 800x600@56Hz [ 377.452] (II) R128(0): 800x600@60Hz [ 377.452] (II) R128(0): 800x600@72Hz [ 377.452] (II) R128(0): 800x600@75Hz [ 377.452] (II) R128(0): 832x624@75Hz [ 377.452] (II) R128(0): 1024x768@60Hz [ 377.452] (II) R128(0): 1024x768@70Hz [ 377.452] (II) R128(0): 1024x768@75Hz [ 377.452] (II) R128(0): 1280x1024@75Hz [ 377.452] (II) R128(0): 1152x864@75Hz [ 377.452] (II) R128(0): Manufacturer's mask: 0 [ 377.452] (II) R128(0): Supported standard timings: [ 377.452] (II) R128(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 377.452] (II) R128(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513 [ 377.452] (II) R128(0): #2: hsize: 1152 vsize 864 refresh: 75 vid: 20337 [ 377.452] (II) R128(0): Supported detailed timing: [ 377.452] (II) R128(0): clock: 108.0 MHz Image Size: 338 x 270 mm [ 377.452] (II) R128(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0 [ 377.452] (II) R128(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0 [ 377.452] (II) R128(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 145 MHz [ 377.452] (II) R128(0): Monitor name: SyncMaster [ 377.452] (II) R128(0): Serial No: HSHLC00618 [ 377.452] (II) R128(0): EDID (in hex): [ 377.452] (II) R128(0): 00ffffffffffff004c2d520237314f44 [ 377.452] (II) R128(0): 311001036c221b782aaea5a6544c9926 [ 377.453] (II) R128(0): 145054bfef8081808140714f01010101 [ 377.453] (II) R128(0): 010101010101302a009851002a403070 [ 377.453] (II) R128(0): 1300520e1100001e000000fd00384b1e [ 377.453] (II) R128(0): 510e000a202020202020000000fc0053 [ 377.453] (II) R128(0): 796e634d61737465720a2020000000ff [ 377.453] (II) R128(0): 004853484c4330303631380a20200025 [ 377.453] (II) R128(0): EDID vendor "SAM", prod id 594 [ 377.453] (II) R128(0): Printing probed modes for output VGA-0 [ 377.453] (II) R128(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP) [ 377.453] (II) R128(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 377.453] (II) R128(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 377.453] (II) R128(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 377.453] (II) R128(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 377.453] (II) R128(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 377.453] (II) R128(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 377.453] (II) R128(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 377.453] (II) R128(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 377.453] (II) R128(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 377.453] (II) R128(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 377.453] (II) R128(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 377.453] (II) R128(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 377.453] (II) R128(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e) [ 377.453] (II) R128(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e) [ 377.453] (II) R128(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 377.453] (II) R128(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 377.453] (II) R128(0): Output VGA-0 connected [ 377.453] (II) R128(0): Using exact sizes for initial modes [ 377.453] (II) R128(0): Output VGA-0 using initial mode 1280x1024 +0+0 [ 377.453] (**) R128(0): Display dimensions: (340, 270) mm [ 377.453] (**) R128(0): DPI set to (95, 96) [ 377.453] (II) Loading sub module "fb" [ 377.453] (II) LoadModule: "fb" [ 377.453] (II) Loading /usr/lib/xorg/modules/libfb.so [ 377.454] (II) Module fb: vendor="X.Org Foundation" [ 377.454] compiled for 1.20.4, module version = 1.0.0 [ 377.454] ABI class: X.Org ANSI C Emulation, version 0.4 [ 377.454] (II) R128(0): Loading EXA module... [ 377.454] (II) Loading sub module "exa" [ 377.454] (II) LoadModule: "exa" [ 377.454] (II) Loading /usr/lib/xorg/modules/libexa.so [ 377.454] (II) Module exa: vendor="X.Org Foundation" [ 377.454] compiled for 1.20.4, module version = 2.6.0 [ 377.454] ABI class: X.Org Video Driver, version 24.0 [ 377.454] (II) R128(0): Loading EXA module. [ 377.454] (II) UnloadModule: "modesetting" [ 377.454] (II) Unloading modesetting [ 377.454] (II) UnloadModule: "fbdev" [ 377.454] (II) Unloading fbdev [ 377.454] (II) UnloadSubModule: "fbdevhw" [ 377.454] (II) Unloading fbdevhw [ 377.454] (II) UnloadModule: "vesa" [ 377.454] (II) Unloading vesa [ 377.533] drmOpenDevice: node name is /dev/dri/card0 [ 377.533] drmOpenDevice: open result is 15, (OK) [ 377.533] drmOpenDevice: node name is /dev/dri/card0 [ 377.533] drmOpenDevice: open result is 15, (OK) [ 377.533] drmOpenByBusid: Searching for BusID pci:0000:01:00.0 [ 377.533] drmOpenDevice: node name is /dev/dri/card0 [ 377.533] drmOpenDevice: open result is 15, (OK) [ 377.533] drmOpenByBusid: drmOpenMinor returns 15 [ 377.533] drmOpenByBusid: Interface 1.4 failed, trying 1.1 [ 377.533] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0 [ 377.533] (II) [drm] DRM interface version 1.0 [ 377.533] (EE) [drm] Could not set DRM device bus ID. [ 377.533] (EE) R128(0): [dri] DRIScreenInit failed. Disabling DRI. [ 377.533] (II) R128(0): Filling in EXA memory info [ 377.533] (II) R128(0): Setting up EXA callbacks [ 377.533] (II) R128(0): Initializing 2D acceleration engine... [ 377.533] (II) R128(0): Initializing EXA driver... [ 377.533] (II) EXA(0): Offscreen pixmap area of 28311552 bytes [ 377.533] (II) EXA(0): Driver registered support for the following operations: [ 377.533] (II) Solid [ 377.533] (II) Copy [ 377.534] (II) R128(0): EXA Acceleration enabled. [ 377.534] (II) R128(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP) [ 377.539] (==) R128(0): Backing store enabled [ 377.539] (==) R128(0): Silken mouse enabled [ 377.539] (II) R128(0): Will use 2 kb for hardware cursor 0 at offset 0x01fffb00 [ 377.539] (==) R128(0): DPMS enabled [ 377.539] (WW) R128(0): Direct rendering disabled [ 377.539] (II) Initializing extension Generic Event Extension [ 377.540] (II) Initializing extension SHAPE [ 377.540] (II) Initializing extension MIT-SHM [ 377.540] (II) Initializing extension XInputExtension [ 377.541] (II) Initializing extension XTEST [ 377.541] (II) Initializing extension BIG-REQUESTS [ 377.541] (II) Initializing extension SYNC [ 377.542] (II) Initializing extension XKEYBOARD [ 377.542] (II) Initializing extension XC-MISC [ 377.543] (II) Initializing extension SECURITY [ 377.543] (II) Initializing extension XFIXES [ 377.543] (II) Initializing extension RENDER [ 377.544] (II) Initializing extension RANDR [ 377.544] (II) Initializing extension COMPOSITE [ 377.545] (II) Initializing extension DAMAGE [ 377.545] (II) Initializing extension MIT-SCREEN-SAVER [ 377.545] (II) Initializing extension DOUBLE-BUFFER [ 377.546] (II) Initializing extension RECORD [ 377.546] (II) Initializing extension DPMS [ 377.546] (II) Initializing extension Present [ 377.547] (II) Initializing extension DRI3 [ 377.547] (II) Initializing extension X-Resource [ 377.547] (II) Initializing extension XVideo [ 377.547] (II) Initializing extension XVideo-MotionCompensation [ 377.547] (II) Initializing extension SELinux [ 377.547] (II) SELinux: Disabled on system [ 377.547] (II) Initializing extension GLX [ 377.548] (II) AIGLX: Screen 0 is not DRI2 capable [ 377.618] (II) IGLX: Loaded and initialized swrast [ 377.618] (II) GLX: Initialized DRISWRAST GL provider for screen 0 [ 377.618] (II) Initializing extension XFree86-VidModeExtension [ 377.618] (II) Initializing extension XFree86-DGA [ 377.619] (II) Initializing extension XFree86-DRI [ 377.619] (II) Initializing extension DRI2 [ 377.619] (II) R128(0): Setting screen physical size to 338 x 270 [ 377.672] (II) config/udev: Adding input device Power Button (/dev/input/event5) [ 377.672] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 377.672] (II) LoadModule: "libinput" [ 377.672] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so [ 377.681] (II) Module libinput: vendor="X.Org Foundation" [ 377.681] compiled for 1.20.4, module version = 0.28.2 [ 377.681] Module class: X.Org XInput Driver [ 377.681] ABI class: X.Org XInput driver, version 24.1 [ 377.681] (II) Using input driver 'libinput' for 'Power Button' [ 377.684] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 21 paused 0 [ 377.684] (**) Power Button: always reports core events [ 377.684] (**) Option "Device" "/dev/input/event5" [ 377.684] (**) Option "_source" "server/udev" [ 377.688] (II) event5 - Power Button: is tagged by udev as: Keyboard [ 377.688] (II) event5 - Power Button: device is a keyboard [ 377.688] (II) event5 - Power Button: device removed [ 377.688] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input8/event5" [ 377.688] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 377.688] (**) Option "xkb_model" "pc105" [ 377.688] (**) Option "xkb_layout" "it" [ 377.720] (II) event5 - Power Button: is tagged by udev as: Keyboard [ 377.720] (II) event5 - Power Button: device is a keyboard [ 377.721] (II) config/udev: Adding input device Power Button (/dev/input/event4) [ 377.721] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 377.721] (II) Using input driver 'libinput' for 'Power Button' [ 377.724] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 24 paused 0 [ 377.724] (**) Power Button: always reports core events [ 377.724] (**) Option "Device" "/dev/input/event4" [ 377.725] (**) Option "_source" "server/udev" [ 377.726] (II) event4 - Power Button: is tagged by udev as: Keyboard [ 377.726] (II) event4 - Power Button: device is a keyboard [ 377.726] (II) event4 - Power Button: device removed [ 377.726] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7/event4" [ 377.726] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7) [ 377.726] (**) Option "xkb_model" "pc105" [ 377.726] (**) Option "xkb_layout" "it" [ 377.728] (II) event4 - Power Button: is tagged by udev as: Keyboard [ 377.728] (II) event4 - Power Button: device is a keyboard [ 377.730] (II) config/udev: Adding input device HOLTEK Wireless USB Device (/dev/input/event0) [ 377.730] (**) HOLTEK Wireless USB Device: Applying InputClass "libinput keyboard catchall" [ 377.730] (II) Using input driver 'libinput' for 'HOLTEK Wireless USB Device' [ 377.733] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 25 paused 0 [ 377.734] (**) HOLTEK Wireless USB Device: always reports core events [ 377.734] (**) Option "Device" "/dev/input/event0" [ 377.734] (**) Option "_source" "server/udev" [ 377.736] (II) event0 - HOLTEK Wireless USB Device: is tagged by udev as: Keyboard [ 377.736] (II) event0 - HOLTEK Wireless USB Device: device is a keyboard [ 377.737] (II) event0 - HOLTEK Wireless USB Device: device removed [ 377.737] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/0003:04D9:A01C.0001/input/input3/event0" [ 377.737] (II) XINPUT: Adding extended input device "HOLTEK Wireless USB Device" (type: KEYBOARD, id 8) [ 377.737] (**) Option "xkb_model" "pc105" [ 377.737] (**) Option "xkb_layout" "it" [ 377.740] (II) event0 - HOLTEK Wireless USB Device: is tagged by udev as: Keyboard [ 377.740] (II) event0 - HOLTEK Wireless USB Device: device is a keyboard [ 377.742] (II) config/udev: Adding input device HOLTEK Wireless USB Device Mouse (/dev/input/event1) [ 377.742] (**) HOLTEK Wireless USB Device Mouse: Applying InputClass "libinput pointer catchall" [ 377.742] (II) Using input driver 'libinput' for 'HOLTEK Wireless USB Device Mouse' [ 377.745] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 26 paused 0 [ 377.745] (**) HOLTEK Wireless USB Device Mouse: always reports core events [ 377.745] (**) Option "Device" "/dev/input/event1" [ 377.745] (**) Option "_source" "server/udev" [ 377.748] (II) event1 - HOLTEK Wireless USB Device Mouse: is tagged by udev as: Mouse [ 377.748] (II) event1 - HOLTEK Wireless USB Device Mouse: device is a pointer [ 377.749] (II) event1 - HOLTEK Wireless USB Device Mouse: device removed [ 377.749] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/0003:04D9:A01C.0002/input/input4/event1" [ 377.749] (II) XINPUT: Adding extended input device "HOLTEK Wireless USB Device Mouse" (type: MOUSE, id 9) [ 377.749] (**) Option "AccelerationScheme" "none" [ 377.749] (**) HOLTEK Wireless USB Device Mouse: (accel) selected scheme none/0 [ 377.749] (**) HOLTEK Wireless USB Device Mouse: (accel) acceleration factor: 2.000 [ 377.749] (**) HOLTEK Wireless USB Device Mouse: (accel) acceleration threshold: 4 [ 377.752] (II) event1 - HOLTEK Wireless USB Device Mouse: is tagged by udev as: Mouse [ 377.752] (II) event1 - HOLTEK Wireless USB Device Mouse: device is a pointer [ 377.754] (II) config/udev: Adding input device HOLTEK Wireless USB Device Mouse (/dev/input/mouse0) [ 377.754] (II) No input driver specified, ignoring this device. [ 377.754] (II) This device may have been added with another device file. [ 377.755] (II) config/udev: Adding input device HOLTEK Wireless USB Device System Control (/dev/input/event2) [ 377.755] (**) HOLTEK Wireless USB Device System Control: Applying InputClass "libinput keyboard catchall" [ 377.755] (II) Using input driver 'libinput' for 'HOLTEK Wireless USB Device System Control' [ 377.759] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 27 paused 0 [ 377.759] (**) HOLTEK Wireless USB Device System Control: always reports core events [ 377.759] (**) Option "Device" "/dev/input/event2" [ 377.759] (**) Option "_source" "server/udev" [ 377.762] (II) event2 - HOLTEK Wireless USB Device System Control: is tagged by udev as: Keyboard [ 377.762] (II) event2 - HOLTEK Wireless USB Device System Control: device is a keyboard [ 377.762] (II) event2 - HOLTEK Wireless USB Device System Control: device removed [ 377.762] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/0003:04D9:A01C.0002/input/input5/event2" [ 377.762] (II) XINPUT: Adding extended input device "HOLTEK Wireless USB Device System Control" (type: KEYBOARD, id 10) [ 377.762] (**) Option "xkb_model" "pc105" [ 377.762] (**) Option "xkb_layout" "it" [ 377.765] (II) event2 - HOLTEK Wireless USB Device System Control: is tagged by udev as: Keyboard [ 377.765] (II) event2 - HOLTEK Wireless USB Device System Control: device is a keyboard [ 377.767] (II) config/udev: Adding input device HOLTEK Wireless USB Device Consumer Control (/dev/input/event3) [ 377.767] (**) HOLTEK Wireless USB Device Consumer Control: Applying InputClass "libinput keyboard catchall" [ 377.767] (II) Using input driver 'libinput' for 'HOLTEK Wireless USB Device Consumer Control' [ 377.770] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 28 paused 0 [ 377.770] (**) HOLTEK Wireless USB Device Consumer Control: always reports core events [ 377.770] (**) Option "Device" "/dev/input/event3" [ 377.770] (**) Option "_source" "server/udev" [ 377.773] (II) event3 - HOLTEK Wireless USB Device Consumer Control: is tagged by udev as: Keyboard [ 377.773] (II) event3 - HOLTEK Wireless USB Device Consumer Control: device is a keyboard [ 377.774] (II) event3 - HOLTEK Wireless USB Device Consumer Control: device removed [ 377.774] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/0003:04D9:A01C.0002/input/input6/event3" [ 377.774] (II) XINPUT: Adding extended input device "HOLTEK Wireless USB Device Consumer Control" (type: KEYBOARD, id 11) [ 377.774] (**) Option "xkb_model" "pc105" [ 377.774] (**) Option "xkb_layout" "it" [ 377.777] (II) event3 - HOLTEK Wireless USB Device Consumer Control: is tagged by udev as: Keyboard [ 377.777] (II) event3 - HOLTEK Wireless USB Device Consumer Control: device is a keyboard [ 377.778] (II) config/udev: Adding input device PC Speaker (/dev/input/event6) [ 377.778] (II) No input driver specified, ignoring this device. [ 377.778] (II) This device may have been added with another device file. [ 378.707] (II) R128(0): EDID vendor "SAM", prod id 594 [ 378.707] (II) R128(0): Using hsync ranges from config file [ 378.707] (II) R128(0): Using vrefresh ranges from config file [ 378.707] (II) R128(0): Printing DDC gathered Modelines: [ 378.707] (II) R128(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP) [ 378.707] (II) R128(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 378.707] (II) R128(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 378.707] (II) R128(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 378.707] (II) R128(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e) [ 378.707] (II) R128(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e) [ 378.707] (II) R128(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 378.707] (II) R128(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 378.707] (II) R128(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 378.707] (II) R128(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 378.707] (II) R128(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 378.707] (II) R128(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 378.707] (II) R128(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 378.707] (II) R128(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 378.707] (II) R128(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 378.707] (II) R128(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 378.707] (II) R128(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 378.708] (II) R128(0): EDID vendor "SAM", prod id 594 [ 378.801] (II) R128(0): EDID vendor "SAM", prod id 594 [ 378.801] (II) R128(0): Using hsync ranges from config file [ 378.801] (II) R128(0): Using vrefresh ranges from config file [ 378.801] (II) R128(0): Printing DDC gathered Modelines: [ 378.801] (II) R128(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP) [ 378.801] (II) R128(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 378.801] (II) R128(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 378.801] (II) R128(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 378.801] (II) R128(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e) [ 378.801] (II) R128(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e) [ 378.801] (II) R128(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 378.801] (II) R128(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 378.801] (II) R128(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 378.801] (II) R128(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 378.801] (II) R128(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 378.801] (II) R128(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 378.802] (II) R128(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 378.802] (II) R128(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 378.802] (II) R128(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 378.802] (II) R128(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 378.802] (II) R128(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 378.802] (II) R128(0): EDID vendor "SAM", prod id 594 [ 378.895] (II) R128(0): EDID vendor "SAM", prod id 594 [ 378.895] (II) R128(0): Using hsync ranges from config file [ 378.895] (II) R128(0): Using vrefresh ranges from config file [ 378.895] (II) R128(0): Printing DDC gathered Modelines: [ 378.895] (II) R128(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP) [ 378.895] (II) R128(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 378.895] (II) R128(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 378.895] (II) R128(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 378.895] (II) R128(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e) [ 378.895] (II) R128(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e) [ 378.895] (II) R128(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 378.895] (II) R128(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 378.895] (II) R128(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 378.896] (II) R128(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 378.896] (II) R128(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 378.896] (II) R128(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 378.896] (II) R128(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 378.896] (II) R128(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 378.896] (II) R128(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 378.896] (II) R128(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 378.896] (II) R128(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 378.896] (II) R128(0): EDID vendor "SAM", prod id 594 [ 403.187] (**) Option "fd" "21" [ 403.187] (II) event5 - Power Button: device removed [ 403.188] (**) Option "fd" "24" [ 403.188] (II) event4 - Power Button: device removed [ 403.188] (**) Option "fd" "25" [ 403.188] (II) event0 - HOLTEK Wireless USB Device: device removed [ 403.188] (**) Option "fd" "26" [ 403.188] (II) event1 - HOLTEK Wireless USB Device Mouse: device removed [ 403.189] (**) Option "fd" "27" [ 403.189] (II) event2 - HOLTEK Wireless USB Device System Control: device removed [ 403.189] (**) Option "fd" "28" [ 403.189] (II) event3 - HOLTEK Wireless USB Device Consumer Control: device removed [ 403.191] (II) UnloadModule: "libinput" [ 403.191] (II) systemd-logind: releasing fd for 13:67 [ 403.195] (II) UnloadModule: "libinput" [ 403.195] (II) systemd-logind: releasing fd for 13:66 [ 403.197] (II) UnloadModule: "libinput" [ 403.198] (II) systemd-logind: releasing fd for 13:65 [ 403.200] (II) UnloadModule: "libinput" [ 403.200] (II) systemd-logind: releasing fd for 13:64 [ 403.203] (II) UnloadModule: "libinput" [ 403.203] (II) systemd-logind: releasing fd for 13:68 [ 403.207] (II) UnloadModule: "libinput" [ 403.207] (II) systemd-logind: releasing fd for 13:69 [ 404.228] (II) Server terminated successfully (0). Closing log file.